Two-finger Hand Ring EDC Knuckle Dusters

The Two-finger Hand Ring EDC Knuckle Dusters stands about 79mm tall, with a palm rest that runs about 65mm long and a plate about 7mm thick. Two finger holes open to an inner diameter of about 25.5mm, and a teardrop opening sits between them for the thumb. Rows of engraved flowers cover the plate, the edges around the rings take a high polish, and a braided black cord threads through the top with a metal bead at the knot.

The frame is cast from zinc alloy, and the whole piece weighs about 114g in the hand. The engraved flowers sit recessed into the plate as a textured field under the palm, while the ring edges stay smooth and rounded where the fingers pass through. The coating takes the color deep into the surface, so the finish reads even from the ring tops down to the lower curve.

Out on a trail, around camp, in the car, or around the house, the flat plate carries without bulk and tucks into a pocket until needed. The two corners at the lower edge come to a point and double as window-breaking points, and the difference between the four finishes rests in the coating color alone — gold, silver, black, or gray.

Key Features

• Engraved floral plate: a textured field of flowers that sits under the palm
• Two-finger ring layout: large rings plus a teardrop opening set the hold
• Window-breaking corners: pointed lower corners built into the frame
• Zinc alloy build: a weighted, planted feel without bulk
• Cord carry: braided cord with a metal bead for hanging storage
• Four finishes: gold, silver, black, and gray coatings

Specifications

• Material: zinc alloy
• Weight: about 114g
• Palm rest length: about 65mm
• Thickness: about 7mm
• Height: about 79mm
• Finger hole inner diameter: about 25.5mm

Spec Options

• Color: Gold
• Color: Silver
• Color: Black
• Color: Gray

Frequently Asked Questions

Q: How does it sit on the hand?

Two fingers pass through the large rings while the thumb rests in the teardrop opening between them. The plate then sits flat against the palm of the hand.

Q: What is it made of?

The whole piece is made from a zinc alloy casting. The metal takes a smooth polish on the rings and keeps the engraved flowers recessed into the plate.

Q: What are the pointed corners at the lower edge for?

The two lower corners come to a point and work as window-breaking points. They sit opposite the palm side, away from the fingers during normal carry.

Q: How does the cord work?

A braided cord passes through the opening at the top of the plate, and a metal bead holds the loop in place. The piece hangs from a hook or rides inside a bag without taking up space.

Q: Which finishes does it come in?

The finishes cover gold, silver, black, and gray. The engraved pattern runs across the plate on every one of them, with the difference resting in the coating alone.

In short, the Two-finger Hand Ring EDC Knuckle Dusters pairs an engraved floral plate and a teardrop thumb opening with window-breaking corners and a braided carry cord, in four coating choices.