Skeleton Three Brothers Outdoor EDC Knuckle Dusters

The Skeleton Three Brothers Outdoor EDC Knuckle Dusters carries a full skull-and-bones engraving across the face, with three small skull stamps set in a row between the four finger holes. The palm rest along one edge spans about 78mm and takes an elongated cut-through slot, while the outer rim steps through beveled corners. The piece runs about 113mm long overall and 68mm tall at 8mm thick, with finger holes of about 28mm×24mm and a weight of about 140g.

The body is zinc alloy throughout, polished smooth with the skull artwork recessed dark against the metal around it. The four holes and the palm-edge slot pass clean through the stock, so the design reads as openwork rather than solid plate, and the beveled corners step along the outer rim to break up the silhouette. Every cutout edge is finished to the same polish as the face, so the openwork looks deliberate from any angle.

Around a kit or in a pocket, the piece stays flat and self-contained — no moving parts and nothing to snag. The four finishes spread the same artwork across different looks: Black for the lowest-key, Bronze and Rose Gold for warmer tones, Silver for the brightest. Under any of them, the shape and the hold stay the same.

Key Features

• Skeleton skull artwork: a full skull-and-bones engraving recessed dark across the face, with three small skull stamps set between the holes
• Four oval finger holes: about 28mm×24mm each, seated in a row across the body
• Openwork palm edge: an elongated cut-through slot set into the 78mm palm rest
• Zinc alloy at about 140g: an even weight that sits steady in the hand
• Beveled outer rim: stepped corners run the edge and break up the outline
• Four finishes: Black, Bronze, Rose Gold or Silver over the same engraving

Specifications

• Material: zinc alloy
• Weight: about 140g
• Total length: about 113mm
• Height: about 68mm
• Thickness: about 8mm
• Finger hole: about 28mm×24mm
• Palm rest length: about 78mm

Spec Options

• Black
• Bronze
• Rose Gold
• Silver

Frequently Asked Questions

Q: What is it made from?

The body is zinc alloy throughout, finished to a smooth polish. The piece weighs about 140g.

Q: How big are the finger holes?

Each of the four holes measures about 28mm×24mm. They run in a row across the body between the skull stamps.

Q: Which finishes are available?

The listing covers four finishes — Black, Bronze, Rose Gold and Silver. All four share the same zinc alloy body, the same engraving and the same weight.

Q: How large is the piece overall?

It runs about 113mm long overall and 68mm tall, at 8mm thick. The palm rest along the edge spans about 78mm.

Q: What is the design on the face?

A full skull-and-bones engraving covers the face, with three small skull stamps set between the finger holes. An elongated cut-through slot runs through the palm rest.

In short, the Skeleton Three Brothers Outdoor EDC Knuckle Dusters pairs a zinc alloy body at about 140g with full skull-and-bones artwork, three skull stamps and an openwork palm edge, across Black, Bronze, Rose Gold and Silver finishes.