Multi-function Outdoor Four-finger Knuckle Dusters Slingshot

The Multi-function Outdoor Four-finger Knuckle Dusters Slingshot runs about 150mm overall, with the fork mouth spanning about 95mm between the tips. The grip section measures about 135mm long and about 85mm tall, with four finger holes and a wide palm opening at the center. An arched fork arm rides across the top, its roller-tipped ends carrying a pair of yellow bands and a leather pouch.

The frame is cast from zinc alloy with a smooth plated surface in a brass tone, and the finish reads even across the grip and the arm. The piece comes apart at the joint below the fork: a small hex wrench turns the screw at the mount, and the grip separates from the arm for packing. The two parts stack flat once the mount is open.

Assembled, it carries as a single unit on a trail or around camp; taken apart, the two halves lie side by side in a pocket or pack. The 2-in-1 build pairs a four-finger knuckle duster frame with a working slingshot fork, so one item covers both roles without a second tool in the bag. The hold sits deep in the hand, and the fork stands clear of the fingers through the whole draw.

Key Features

• 2-in-1 build: a knuckle grip and a slingshot fork sharing one frame
• Takedown design: a hex wrench opens the mount and the two parts stack flat
• Four-finger hold: a full grip with a wide palm opening at the center
• Roller-tipped fork: the band ends seat cleanly on the arm tips
• Plated surface: a smooth brass-tone finish over the casting

Specifications

• Material: zinc alloy
• Overall length: about 150mm
• Fork mouth length: about 95mm
• Knuckle duster length: about 135mm
• Knuckle duster height: about 85mm

Frequently Asked Questions

Q: How do the two functions combine?

The knuckle grip and the fork arm combine in one frame. A joint below the fork lets the piece separate, so the same item serves as a four-finger knuckle duster and a slingshot.

Q: How does it come apart?

A hex wrench turns the screw at the joint below the fork. Once the mount is open, the grip and the arm lift apart and stack flat.

Q: What are the fork tips like?

Each of the two tips carries a roller that the band wraps around. The band ends seat cleanly, and the leather pouch hangs centered between the arms.

Q: What is the frame made of?

The frame is made from a zinc alloy casting, covering both the grip and the fork arm. The surface takes a smooth plated finish in a brass tone.

Q: What holds the band in place?

The band ends hook over the roller tips at each side of the fork. Tension keeps them seated while the pouch stays centered for the draw.

In short, the Multi-function Outdoor Four-finger Knuckle Dusters Slingshot pairs a four-finger grip with a takedown fork arm and a leather band setup, all in one plated casting.