Classic Mini Skull Brass Knuckle Dusters Outdoor EDC Tool

The Classic Mini Skull Brass Knuckle Dusters Outdoor EDC Tool is a four-finger knuckle duster made from brass with a polished gold-tone finish. It measures 108mm × 56mm × 14mm and weighs about 325.5g, a mini format across the whole body. Four round finger holes run down the front, and the center face carries a grid-textured panel with an embossed skull. The outline dips and rises along the top, with a curved pointed tip at the lower edge.

The body is cut from solid brass and brought to a bright polished sheen. Across the center sits a fine grid texture pressed into the surface, with the skull embossed at its middle, and the metal around it stays smooth and reflective. Each finger hole measures 23mm × 21mm, sized to the mini body, and the upper edge above the holes steps in a scalloped wave. The corners carry a chamfered line that runs along the whole outline.

The small footprint takes up little room in a pocket or a pack, and the heft comes through the moment it is picked up. On a desk or a shelf, the metalwork reads clearly from a short distance, so the piece doubles as a display item in an EDC tray.

Key Features

• Mini four-finger format: a small footprint in a pocket or pack, with a low profile carried in hand
• Solid brass body: about 325.5g of metal with a polished gold-tone finish
• Embossed skull panel: set into a grid-textured center face
• 23mm × 21mm finger holes: four round openings sized to the mini body
• Shaped outline: a scalloped upper edge above the holes and a curved pointed tip below
• Display-ready metalwork: reads clearly on a desk, shelf, or EDC tray

Specifications

• Material: Brass
• Size: 108mm × 56mm × 14mm
• Finger hole: 23mm × 21mm
• Weight: about 325.5g

Important Notes

• It is a mini version with a compact size, making it suitable for people with smaller hands.

Frequently Asked Questions

Q: What is the piece made from?

It is made from solid brass with a polished gold-tone finish. The grid texture and the embossed skull are worked into the same metal surface.

Q: How large are the finger holes?

Each finger hole measures 23mm × 21mm. The four openings follow the sizing of the mini body.

Q: What are the size and weight?

It measures 108mm × 56mm × 14mm and weighs about 325.5g. The weight comes from the solid metal body.

Q: Is it a full-size or mini knuckle duster?

It is the mini version, built to a smaller format than a full-size knuckle duster. The openings and overall span follow the compact body rather than a full-size frame.

Q: How does it work as a display piece?

The grid-textured panel and polished surface read clearly on a desk, shelf, or EDC tray. It sits well alongside other metal EDC pieces.

In short, the Classic Mini Skull Brass Knuckle Dusters Outdoor EDC Tool pairs a solid brass body with an embossed skull panel, four finger holes, and a mini 108mm × 56mm × 14mm footprint at about 325.5g — a compact piece for a pocket, a pack, or a display tray.